1感光乳劑手工涂布操作指南


Use the more rounded edge of the coating trough for the base coats
2使用邊緣圓潤的上漿器,倒入感光乳劑。


Use a dry,well degreased screen held firmly.Level the trough to prevent thick edges.
3把繃好的干燥網框靠在牢固的支架上。刮斗的刃口邊呈水平狀靠在網框的下端,再使刮斗稍向上傾斜使感光劑與網布接觸。


Apply firm,even pressure and use a slow coating speed to minimise air entrapment.
4自下而上平穩慢" />
首页 >> 新聞資訊 >> 絲印技術文章 >>絲網版如何涂布感光漿
详细内容

絲網版如何涂布感光漿

絲網板如何涂布感光膠

絲網版如何涂布感光漿

how to guide to:manually coating plus direct emulsions
1感光乳劑手工涂布操作指南

Use the more rounded edge of the coating trough for the base coats
2使用邊緣圓潤的上漿器,倒入感光乳劑。

Use a dry,well degreased screen held firmly.Level the trough to prevent thick edges.
3把繃好的干燥網框靠在牢固的支架上。刮斗的刃口邊呈水平狀靠在網框的下端,再使刮斗稍向上傾斜使感光劑與網布接觸。

Apply firm,even pressure and use a slow coating speed to minimise air entrapment.
4自下而上平穩慢速移動刮斗以減少空氣的滯留。

Apply more coats from the print side as required
5根據要求印刷面多涂布幾次

Look for a glossy surface on the aqueegee side.This shows the mesh has been filled with emulsion.
6檢查下可以看到光滑的表面。表明網格已經充滿了乳液。

Turn the screen around
7轉到另一面

Apply one or more coats from the squeegee side to build up the stencil profile to improve print quality.
8刮印面多次涂布以提高印刷質量。

Clean off any thick edges with a card.
9用卡片清理下邊緣

Dry the screen,squeegee side up.
10刮刀面朝上,放入烤箱烘干網版。

Keep the coating trough edge clean.
11上漿器邊緣要保持清潔。

Cover the trough with a damp,fibre free cloth if further coats are required
12用無塵布蓋住上漿器防止灰塵落入。

Use the narrow edge of the trough to apply additional face coats to the print side once the emulsion is dry.
13感光膠干燥后進行再次涂布。

Once the screen has been dried,it can be exposed and processed as normal.
14網板干燥后就可以按照正常方式曝光處理了。

涂布感光漿視頻演示

 欲進一步查看如何操作請看視頻:http://www.xbwuoe.live/hhpeaa/vip_doc/403978.html

客服中心
联系方式
0595-85660508
- 業務部
扫一扫,关注网站
技术支持: 建站ABC | 管理登录
新11选5开奖结果